[linux-help] Install of RH 7.2 on a SIS box
[Top] [All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
Trying to install RedHat 7.2 on a Silicon Integrated Systems (SIS) 800 MHz
Athlon, large disk, 128MB memory. I have three of these and successfully
installed 7.2 on two of them by using "nofb" (no frame
buffers). The third won't even get past the boot disk.
Made two more boot disks - same result. It sets up the choices (enter, nofb,
lowres, expert, etc, ) loads initrd.img and vmlinuz from floppy, message "Ok
loading the kernel," then the page shown below appears.
Changed setup to boot from CDROM and get the same result - loads initrd.img and
vmlinuz then gives the messages shown below.
I got out the old 7.0 disks and floppy and it loaded easily. Have a good 7.0
system with KDE windows, but it doesn't have the drivers for all the SIS
peripherals (sound, ethernet, and others, which are all on the mainboard), so
7.0 is worthless for this machine.
The bios setups on all machines are identical.
Can anyone make any sense out of the page below? Any help would be greatly
appreciated.
bruce
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.18 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
Linux Net4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01122d1>]
EFLAGS: 00010206
eax: c0101c78 ebx: c7800000 ecx: 88a32000 edx: c0101000
esi: c1232000 edi: 06ff0000 ebp: 00000000 esp: c135ff54
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c135f000)
stack: 06ff1000 00001000 06ff0000 c00fc390 88a32000 c0101c78 00000010 c7800000
c1232000 06ff0000 00000000 c0112523 c7800000 3f7f0000 c1232000
00000000
c822184c c00fc390 00000014 c7800000 c123184d c0233a70 06ff0000
c123184d
Call Trace: [<c7800000>] [<c0112523>] [<c7800000>] [<c822184c>] [<c7800000>]
[<c0105000>] [<c0105201>] [<c0105000>] [<c0105642>] [<c01051f8>]
Code: 0f 0b 8b 5c 24 14 85 db e9 31 01 00 00 89 f6 b8 f4 ff ff ff
<0>Kernel panic: Attempted to kill init!
-- This is the linux-help@xxxxxxxxx list. To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
- [linux-help] Re: Red Hat 7.2 & Canon S450 Printer, Greg House, 2001/12/02
- [linux-help] Re: Red Hat 7.2 & Canon S450 Printer, Michael Moore, 2001/12/02
- [linux-help] Re: Red Hat 7.2 & Canon S450 Printer, Benjamin Bunck, 2001/12/03
- [linux-help] Re: Red Hat 7.2 & grip, Anne McCadden, 2001/12/17
- [linux-help] Re: Red Hat 7.2 & grip, Michael Moore, 2001/12/18
- [linux-help] Re: Red Hat 7.2 & grip, Anne McCadden, 2001/12/18
- [linux-help] Re: Red Hat 7.2 & grip, Matt Campbell, 2001/12/18
- [linux-help] GIMP/LOCALE, keith frost, 2001/12/19
|
|