[linux-help] Re: hardware help Off Topic

["JLWeaver" <jlweaver@xxxxxxx>]

Bet you are trying to install the wrong type of memory.  
----- Original Message ----- 
From: "bruce" <bbales@xxxxxxx>
To: <linux-help@xxxxxxxxx>
Sent: Thursday, April 03, 2003 1:58 PM
Subject: [linux-help] hardware help Off Topic


> After swapping memory DIMMS on a friend's computer, the computer 
> refuses to power up.  It has a push-button switch on the front which 
> has to be held in for four or five seconds to power down and one push 
> normally powers it up.
> 
> The power cord on the back is okay (tried another cord) and the front 
> panel switch is working (used an ohmmeter) and the power supply is at 
> least partly working as there is 3.7 volts on the pin labeled "power 
> on" on the power supply when it's unplugged from the motherboard.
> 
> Can't seem to find any help on the web.  Does anyone know enough about 
> these newer power supplies and how they are turned on to suggest a 
> solution?  I don't want to have to buy a new motherboard.
> bruce
> 
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://www.complete.org/cgi-bin/listargate-aclug.cgi
> 
-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://www.complete.org/cgi-bin/listargate-aclug.cgi