[linux-help] Re: 3c509 problems

[John Phillips <jphillip@xxxxxxxxxxxxx>]

dmesg | less    will let you see the parameters for your nic.
John Phillips



On Thu, 15 Jun 2000, Matt Alexander wrote:

> You know what, before I get into all of that, I'd like to try something,
> could you tell me how to find the port and irq for an my nic, its an isa so
> it's a little harder.
> 
>                                   -Matt Alexander
> 
> -----Original Message-----
> From: linux-help-bounce@xxxxxxxxx [mailto:linux-help-bounce@xxxxxxxxx]On
> Behalf Of Carl D Cravens
> Sent: Thursday, June 15, 2000 10:39 PM
> To: linux-help@xxxxxxxxx
> Subject: [linux-help] Re: 3c509 problems
> 
> On Thu, 15 Jun 2000, james l wrote:
> 
> > I have a batch of 3com Etherlink 3 (3c509) cards, and I have not been able
> to
> > get them to work with linux. I have used linuxconf, redhat's programs, and
> by
> > hand, but I have not been able to get them to woirk. I don't think it is a
> > problem with the cards, I put one in my sister's windows box and it worked
> > fine, after getting the drivers. Has this happened to anyone else?
> 
> Hum.  Hum, hum, hum.  Yup, that's what I've got in my server.  Got it used
> without documentation.  I'm running the 3c59x driver module (as loadable),
> but it's the second card in the box.  I've not had any trouble with it at
> all.
> 
> What are the symptoms of the problem?  Any error messages?  If the driver
> is a loadable module, is it loading properly?  (cat /proc/modules).  Is it
> in /etc/modules?  Do you have the right driver (3c59x)?  Do you have a
> reasonably recent driver?
> 
> This being a PCI card, the module can scan for and detect the proper
> configuration... you shouldn't have to tell it anything about the card.
> Just load the driver and it should do its thing.  Hum... make sure that
> the PCI IRQ isn't conflicting with any other devices.  (I think it's
> possible to do that.)  That should be set in the motherboard BIOS.  IRQ
> and IO range is set by the motherboard, so there shouldn't be anything to
> configure on the card.  (Unlike jumperless ISA plug-n-pray cards, where
> you have to have a program to change the settings on the card.)
> 
> See where we are at this point and if that doesn't give you a hint, give
> us more details and we'll continue.
> 
> --
> Carl D Cravens (raven@xxxxxxxxxxx)
> Hey, I ran Windows the other day, and it didn't crash!
> 
> 
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> 
> 
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> 


-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi