[linux-help] 'pci bios' problems

[Michael Bainum <kodiakm@xxxxxxxxxxxxx>]

I have installed 'Woody' on a new hard drive and am having problems with
the NIC.  I know that the nic is ok and works under Linux but for some
strange reason the card is not being given the proper irq.  I have my
bios set to assign it #3 irq.  Included is a trimmed /var/log/dmesg
entry.  Could someone please point out what I am missing?
Mike

Linux version 2.2.15 (herbert@gondor) (gcc version 2.95.2 20000313
(Debian GNU/Linux)) #1 Thu Jun 1 10:47:16 EST 2000

snip

mtrr: v1.35a (19990819) Richard Gooch (rgooch@xxxxxxxxxxxxx)
PCI: PCI BIOS revision 2.10 entry at 0xf08d0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:50
PCI: Enabling I/O for device 00:51
PCI: Enabling I/O for device 00:60
PCI: BIOS reporting unknown device 00:58
PCI: Device 00:59 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)

snip

ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
  WARNING: The PCI BIOS assigned this PCI NE2k card to IRQ 0, which is
unlikely to work!.
 You should use the PCI BIOS setup to assign a valid IRQ line.
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x8000, IRQ 0.
eth0: RealTek RTL-8029 found at 0x8000, IRQ 0, 00:E0:29:18:25:47.

-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi