[linux-help] Re: Connecting Roadrunner to Linux

["Matt Alexander" <webmaster@xxxxxxxxx>]

It is a 10Base-T network, but I only get the link light when I boot up and
it is trying to "bring up interface eth0".  It is a new card, it should
work, it worked before on a win98 box.

                                  -Matt Alexander

-----Original Message-----
From: linux-help-bounce@xxxxxxxxx [mailto:linux-help-bounce@xxxxxxxxx]On
Behalf Of John Alexander
Sent: Tuesday, June 13, 2000 11:57 AM
To: linux-help@xxxxxxxxx
Subject: [linux-help] Re: Connecting Roadrunner to Linux

OK, can you describe the network to which you are attaching the card? Is it
a
10Base-T or Thinnet network? If it's a 10Base-T network, do you have a link
light on the card and the hub when you plug in the cable with the machine
on?
Is this ELink III a new card, or was it bought used?

ja

On Tue, 13 Jun 2000, Matt
Alexander wrote: > first, you have know if your nic card is installed. >
Yes,
it is installed, but I don't know if it is working >  correctly, on the
install
I selected dhcp but when I >  boot it up it fails when it tries to bring up
eth0
interface >  If this helps you any, I have a 3Com EtherlinkIII      ISA >  >
did you configure redhat to be a network box when you set it up? > I'd like
it
to be, I installed everything using the custom > Function in the install
>
> was the nic card installed in the box when you installed red hat?
> If this refers to hardware installed then yes, if it refers to
> Software then no
>
> or do you have to run a module to find the nic and get it going?
>       I probably do if it can't find it
>
> When I ran ifconfig I got:
>
> lo    Link encap: Local Loopback
>       inet addr: 127.0.0.1  Mask: 255.0.0.0
>       UP LOOPBACK RUNNING  MTU: 3924  Metric: 1
>       RX packets: 18 errors: 0 dropped: 0 overruns: 0 frame: 0
>       TX packets: 18 errors: 0 dropped: 0 overruns: 0 carrier: 0
>       collisions: 0 txqueuelen: 0
>
>                                   -Matt Alexander
>
> -----Original Message-----
> From: linux-help-bounce@xxxxxxxxx [mailto:linux-help-bounce@xxxxxxxxx]On
> Behalf Of bert
> Sent: Monday, June 12, 2000 5:50 PM
> To: linux-help@xxxxxxxxx
> Subject: [linux-help] Re: Connecting Roadrunner to Linux
>
> On Sat, 10 Jun 2000, Matt Alexander wrote:
>
> > The subject says it all, I need help connecting Red Hat 6.2 to the
> Internet
> > through Roadrunner. I know you have probably gotten many emails about
this
> > same subject but I am a rather new Linux user and this is my first time
> > using this email help group.  If you could help me out with this that
> would
> > be great.
> > I also am connecting my Linux box to two other Win98 boxes.
> >  And I am going to be using my Linux box to host the large files
> > for a web site of mine.
> > Could you give me the basics (and maybe some of the advanced issues) on
> how
> > to get a server going.
> > Date: Sat, 10 Jun 2000 22:27:45 -0500
> >
> >       http://www.redhat.com/mirrors/LDP/HOWTO/Cable-Modem/index.html
> >       http://www.redhat.com/mirrors/LDP/HOWTO/SMB-HOWTO.html
> >       http://www.redhat.com/mirrors/LDP/HOWTO/WWW-HOWTO.html
> >       http://www.redhat.com/mirrors/LDP/HOWTO/WWW-mSQL-HOWTO.html
> >       http://www.redhat.com/mirrors/LDP/HOWTO/HOWTO-INDEX-3.html#ss3.1
> > Date: Sun, 11 Jun 2000 15:11:39 -0500
> > From: Matt Alexander <webmaster@xxxxxxxxx>
> > I tried using DHCPcd but was unable to install it, the install section
of
> > the readme file was unclear and what I did under stand didn't work.  I
> also
> > tried to use pump.  I typed   pump -I eth0 -h hom.kscable.com       It
> > failed too.
> > Date: Sun, 11 Jun 2000 22:51:31 -0500
> > From: Bruce Bales <bbales@xxxxxxxxxxx>
> > Did you try home.kscable.com ?   Or did you just misspell it above?
> > Date: Mon, 12 Jun 2000 00:48:52 -0500
> > From: Matt Alexander <webmaster@xxxxxxxxx>
> >
> > Oops, yeah, I just misspelled it, I tried home.kscable.com
> >
> > Date: Mon, 12 Jun 2000 09:54:39 -0500
> > From: John Alexander <john.alexander@xxxxxxxx>
> > Can you tell us more about how dhcpcd failed when you tried o run it?
Were
> > you root/equivalent when you tried to run it? Do you have the netwokr
card
> > configured correctly?
>
> sorry 'bout the way i strung the thread thru
>
> i think john is on the right track --
> first, you have know if your nic card is installed.
> i only have questions at this point, matt. sorry.
> did you configure redhat to be a network box when you set it up?
> was the nic card installed in the box when you installed red hat?
> or do you have to run a module to find the nic and get it going?
>
> when you run the command 'ifconfig', what do you see?
>
> ok,
> bert
>
>
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
>
>
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi


-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi


-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi