Complete.Org: Mailing Lists: Archives: discussion: September 1999:
Re: [aclug-L] smc ethernet
Home

Re: [aclug-L] smc ethernet

[Top] [All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: ALUG <aclug-L@xxxxxxxxxxxx>
Subject: Re: [aclug-L] smc ethernet
From: phrostie <phrostie@xxxxxxxxxxxxx>
Date: Mon, 13 Sep 1999 06:39:27 -0500
Reply-to: aclug-L@xxxxxxxxxxxx

it is an older isa
 

also, if it is a pci card check /etc/conf.modules
mine contains the following:
 
alias eth0 ne
options ne io=0x300 irq=10

 
      i have an smc(WD clone) ethernet card that worked well on my older PHT 2.0 system (kernel
      2.0.33)but
      my newer RH 5.2 (2.0.36) won't see it.
      i changed over because the RH 5.2 uses less disk space.
      i've already recompiled the kernal once(first time).
      but did not seem to help.
      tomarrow i'm going to start over again any ideas?

      on the card it read:

 

      --
      phrostie@xxxxxxxxxxxxx
      Oh I've slipped the surly bonds of dos
      and danced the skies on LINUX silvered wings.
      http://www.cottagesoft.com/~phrostie/cad-tastrafy

 

-- 
phrostie@xxxxxxxxxxxxx
Oh I've slipped the surly bonds of dos
and danced the skies on LINUX silvered wings.
http://www.cottagesoft.com/~phrostie/cad-tastrafy
 
[Prev in Thread] Current Thread [Next in Thread]