Complete.Org: Mailing Lists: Archives: discussion: September 1999:
[aclug-L] smc ethernet 		Home

[aclug-L] smc ethernet

[Top] [All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: ALUG <aclug-L@xxxxxxxxxxxx>
Subject: [aclug-L] smc ethernet
From: phrostie <phrostie@xxxxxxxxxxxxx>
Date: Sun, 12 Sep 1999 09:08:09 -0500
Reply-to: aclug-L@xxxxxxxxxxxx
i have an smc(WD clone) ethernet card that worked well on my older PHT 2.0 system (kernel 2.0.33)but
my newer RH 5.2 (2.0.36) won't see it.
i changed over because the RH 5.2 uses less disk space.
i've already recompiled the kernal once(first time).
but did not seem to help.
tomarrow i'm going to start over again any ideas?

on the card it read:

smc
83c690ljp
f9311
6t71389

it has two jumpers W1 and W2
i have both set to soft.
  

-- 
phrostie@xxxxxxxxxxxxx
Oh I've slipped the surly bonds of dos
and danced the skies on LINUX silvered wings.
http://www.cottagesoft.com/~phrostie/cad-tastrafy
 
[Prev in Thread] Current Thread [Next in Thread]