[linux-help] setup scsi scanner

[bbales <bbales@xxxxxxxxxxx>]

I have a dual booted Athlon 800MHz box with Adaptec AVA2906 scsi board, a 
scsi zip drive and scsi Microtek E3 scanner.  Running RH 7.2 and win98.  Both 
scanner and zip work with win98.  The Zip drive (on the end of the scsi bus) 
works fine with Linux, but I can't get the scanner recognized.

dmesg indicates it found a scanner, but doesn't recognize it.  RH7.2 comes 
with sane and xsane.  There are several libsane-microtek files (.so, .a, .la, 
etc).  But how do I bind sane-microtek to the scanner?  and what do I put in 
microtek.conf?  I've spent days with the HOWTOs and google and I can't find 
anything useful.

A portion of dmesg follows:

SCSI subsystem driver Revision: 1.00 
PCI: Found IRQ 5 for device 00:09.0 
(scsi0) <Adaptec AIC-7850 SCSI host adapter> found at PCI 0/9/0 
(scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs 
(scsi0) Cables present (Int-50 NO, Ext-50 YES) 
(scsi0) Downloading sequencer code... 415 instructions downloaded 
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0 
       <Adaptec AIC-7850 SCSI host adapter> 
  Vendor:           Model: Scanner           Rev: 1.80 
  Type:   Scanner                            ANSI SCSI revision: 04 
  Vendor: IOMEGA    Model: ZIP 100 PLUS      Rev: J.66 
  Type:   Direct-Access                      ANSI SCSI revision: 02 
scsi : 0 hosts left. 

>
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://www.complete.org/cgi-bin/listargate-aclug.cgi
-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://www.complete.org/cgi-bin/listargate-aclug.cgi