Complete.Org: Mailing Lists: Archives: discussion: July 2001:
[aclug-L] Re: Base memory 512kb and extend memory 31744KB
Home

[aclug-L] Re: Base memory 512kb and extend memory 31744KB

[Top] [All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: discussion@xxxxxxxxx
Subject: [aclug-L] Re: Base memory 512kb and extend memory 31744KB
From: Maverick <mluvw47@xxxxxxxxx>
Date: Thu, 19 Jul 2001 13:55:14 -0700 (PDT)
Reply-to: discussion@xxxxxxxxx

Hi, Tom

  it is an AST machine with PII-233. yes I went to the
bios and that shows:

base memory: 512K
extended of 31744k

when it bootup it show 32XXXM memory, and it got a 9G
drive on that. I don't know why it doesn't work.

Regards,
Mav



--- Thomas Wallis <wallis@xxxxxxxxxxx> wrote:
> 
> 
>       This is very strange.  Does your BIOS report base
> memory of 512K
> and extended of 31744?  I have certainly seen LINUX
> not be able to detect
> all the memory of the machine, but it normally goes
> ahead and installs
> anyway, and just uses part of the memory until you
> use the lilo append
> trick to tell it how much memory the system really
> has.  What kind of
> machine is this?  
> 
>                               Tom W.
> 
> 
> > > On Thursday 19 July 2001 12:18 am, you wrote:
> > > > Hi, all
> > > >
> > > > I have a PII-233, and it has
> > > > Base memory 512kb and extend memory 31744KB
> > > > on boot up it show 32M memory,
> > > > I tried to install Debian, so I put the
> bootable
> > > > Debian cd on the cdrom . When it boot, it
> shows:
> > > >
> > > > " SYSLINUX 1.48xxxx Copyright.
> > > > It appears your computer has less than 608k of
> the
> > > > low("Dos") RAM. Linux needs at least this
> amount
> > > to
> > > > boot. If you get this message in error, hold
> down
> > > the
> > > > Ctrl key while booting, and I will take you
> word
> > > for
> > > > it.
> > > > Boot failed."
> > > >
> > > > When I hold the Ctrl key, it shows the Welcome
> to
> > > > Debian page, with the prompt "boot: "
> > > > I don't know what agrument should I put after
> the
> > > > boot, if I just hit the enter key. It show
> > > > "Boot fail: please change disks and press a
> key to
> > > > continue."
> > > >
> > > > I tried to put a Debian boot disk, it still
> > > generate
> > > > the same error.
> > > >
> > > > Anyone has any idea what should I do? any
> argument
> > > > should I tried? please help.
> > > > Thanks.
> > > >
> > > > Regards,
> > > > Mav
> > > >
> > > >
> __________________________________________________
> > > > Do You Yahoo!?
> > > > Get personalized email addresses from Yahoo!
> Mail
> > > > http://personal.mail.yahoo.com/
> > > > -- This is the discussion@xxxxxxxxx list.  To
> > > unsubscribe,
> > > > visit
> > >
> >
>
http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> > > -- This is the discussion@xxxxxxxxx list.  To
> > > unsubscribe,
> > > visit
> > >
> >
>
http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> > > 
> > 
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Get personalized email addresses from Yahoo! Mail
> > http://personal.mail.yahoo.com/
> > -- This is the discussion@xxxxxxxxx list.  To
> unsubscribe,
> > visit
>
http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> > 
> 
> Disclaimer: All opinions expressed here are my own
> and not those of WSU.
> 
> EMAIL address:  wallis@xxxxxxxxxxx   
> wallis@xxxxxxxxxxxxxxxxxx  
> 
>    
> 
> 
> -- This is the discussion@xxxxxxxxx list.  To
> unsubscribe,
> visit
>
http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> 


__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
-- This is the discussion@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi


[Prev in Thread] Current Thread [Next in Thread]