Complete.Org: Mailing Lists: Archives: discussion: January 2000:
[aclug-L] Re: networking help needed 		Home

[aclug-L] Re: networking help needed

[Top] [All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: aclug-L@xxxxxxxxxxxx
Subject: [aclug-L] Re: networking help needed
From: John Reinke <jmreinke@xxxxxxxxx>
Date: Wed, 26 Jan 2000 02:27:41 -0600
Reply-to: aclug-L@xxxxxxxxxxxx 
>> How do I get Linux to recognize that I have 96MB of RAM?
>
>IIRC, 2.2.x kernels will see the RAM without help, whereas you will have to
>tell lilo append "mem=96M".  From the BootPrompt-HOWTO:
>...

Just to verify: I should add

append="mem=96M"

to /etc/lilo.conf and then run lilo and reboot. I did this several times,
but it still only sees 64MB of the 96MB installed. I'm certain I have 96
installed - a 64 and a 32. It is all counted when the computer boots.

Any suggestions on why it isn't working? I have Debian 2.1, with kernel 2.2.14.

Thanks,
John
[Prev in Thread] Current Thread [Next in Thread]