[linux-help] Re: Redhat RPM help

[Bruce Bales <bbales@xxxxxxxxxxx>]

Yes, I was trying to run wmaker from the command line.  I made the change to 
.xinitrc and still get the same.  Full text is:
    wmaker warning: Xserver doesn't support locale
    wmaker warning: cannot set locale modifiers
    wmaker Fatal error: could not open display ""

If I run .xinitrc, I get the same as running wmaker.

I tried startx and got   "command not found"

I looked at startx on another (gnome/kde) machine, it is 1430 bytes of bash 
that I don't understand.

stumped,
bruce

"gLaNDix (Jesse Kaufman)" wrote:

> ok, i'm assuming you ran wmaker from the commandline...  what you need to
> do instead is edit your ~/.xinitrc or ~/.xsession file and add the line:
>
> exec /usr/local/bin/wmaker
>
> where "/usr/local/bin" should be replaced w/ the path to wherever wmaker
> resides (find out by 'which wmaker').  then, you can safely comment out
> (add a "#" at the beginning) any other lines starting w/ "exec"...
>
> good luck!
> gLaNDix
>
> <<< lloydix.2y.net FreeBSD 4.3-RELEASE #0: Thu Jul 5 06:16:31 CDT 2001 
> glandix@xxxxxxxxxxxxxx:/usr/obj/usr/src/sys/LLOYDIX >>>
>
> On Sat, 7 Jul 2001, Bruce Bales wrote:
>
> >
> > Some progress.  I went to rpmfind.net as Jesse suggested and eventually 
> > found and
> > RPMed 17 required RPM files from the cdrom.  The final one was WindowMaker. 
> >  I then
> > ran wmaker.inst.  It installed, but something is still missing.  wmaker 
> > still says
> > "fatal error - could not open display."
> >
> > All the docs say windowmaker is a window manager and as such I assume there 
> > must be
> > an Xwindows program to manage.  Do I have to install KDE or Gnome to use
> > windowmaker?  Or is there something smaller than KDE or Gnome?
> >
> > Don't have a lot of space left on the 340MB disk.
> >
> > bruce
> >
> > "gLaNDix (Jesse Kaufman)" wrote:
> >
> > > The prereq's rpm (the program) lists when you try to 'rpm -ivh
> > > whatever.rpm' are usually files within another package (rpm) that are
> > > required to install the packge in question...  for instance, Window Maker
> > > is dependant on libPropList...  rather than saying "Window Maker is
> > > dependant on libPropList-0.8.0-i386.rpm" (i just made up the version,
> > > since i'm not sure of the recent release), it will most likely say that
> > > WM is dependant on libPropList.so.2 or something a little more abstract
> > > on more complex libraries...
> > >
> > > the easiest thing to do to get the RPMs that the prereq's are included in
> > > is searching on rpmfind.net for "libPropList.so.2" or whatever it lists...
> > > it should find the .rpm file you need to download and install...
> > >
> > > you also might want to search on freshmeat.net for rpm or gnorpm which
> > > will find some great GUI programs for installing RPMs...  works very well,
> > > and some (like RPMDrak in Mandrake GNU/Linux) will actually tell you which
> > > rpms are required and offere to download/install them for you...
> > >
> > > Hope this helps...  feel free to ask again if this doesn't clarify
> > > anything... it's been quite a while since i've used RH and i've just
> > > recently switched to FreeBSD, so I hope I didn't get my wires crossed when
> > > replying! : ^ )
> > >
> > > gLaNDix
> > >
> > > On Thu, 5 Jul 2001, Bruce Bales wrote:
> > >
> > > >
> > > > I need help on an RPM problem.
> > > > I am trying to rpm WindowMaker into a small system I have installed RH 
> > > > 6.2 on.
> > > >
> > > > rpm -ivh WindowMaker provides me with a list of prerequisites - files 
> > > > that
> > > > windowmaker needs - starting with wmconfig (which is an rpm file) and 
> > > > the rest
> > > > of them lib*.so.0 files like libaudiofile.so.0 and libesd.so.0.
> > > >
> > > > Running rpm -ivh wmconfig gives me anothe list of lib*.so.0 files.
> > > >
> > > > Since these files are not rpm files, I can't install them using rpm.  I 
> > > > have
> > > > copied them from the cdrom to various places on the disk and rpm -ivh
> > > > WindowMaker still gives me the same list of files needed.
> > > >
> > > > I looked at another RH 6.2 system and copied some of the files to the 
> > > > location
> > > > of those with the same name - no good.
> > > >
> > > > I copied some to a directory that is in my PATH, thinking redhat would 
> > > > look
> > > > there - no good.
> > > >
> > > > Where can I copy these files to such that redhat can find them and 
> > > > complete the
> > > > install?
> > > >
> > > > Thanks in advance,
> > > > bruce
> > > >
> > > >
> > > >
> > > > -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> > > > visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> > > >
> > > >
> > >
> > > -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> > > visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> >
> > -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> > visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
> >
>
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi

-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi