[linux-help] Re: 2 NIC question

[Bruce Bales <bbales@xxxxxxxxxxx>]

Nathan, I am pretty new to this, but I have had better luck using one
PCI NIC and one ISA NIC.  Linux can find and configure the PCI card on
boot up pretty easily and will call it eth0, but it needs help w/ the
other.  Add "alias eth1 tulip" where tulip is the appropriate driver for
the ISA card.

Some of the information needed for setup can be entered using the basic
section of netconf.  If both of your cards are the same, enter them here
and see what happens.
Luck,
bruce

Nathan wrote:

> Hello,
>
> I'm setting up a box w/ 2 NICs.  One howto I was
> reading said it's better to use two NICs that require
> different modules instead of two that use the same
> module.  Is this true?  If so, why?
>
> Nathan
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi

-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi