Re: [aclug-L] HELP!!!

[Jesse Kaufman <kaufmjes@xxxxxxxxxxxxxxx>]

John Goerzen wrote:

> I understand, but perhaps it will work at 360x360 but not 720x720.  (To be
> sure, 720x720 on an ink jet is higher than is realistically possible with
> the technology, for B&W at least, but it is still possible that it could
> look better than 360x360.)  This is on the theory that a printer that works
> to produce good-looking output, but doesn't to produce better looking
> output, should be set to produce good-looking output until the problem can
> be isolated.  Since you sounded desperate, I am just suggesting things to
> try to produce acceptable output for your class. :-)

ok, kewl.. i'll try these things... strange thing is that it worked

just fine w/ ghostscript-3.33 (the one that comes default w/ RedHat

5.1)..  why would it suddenly not work w/ a semi recent version?

--
+============================+============================+
! Tabor College              !          ICQ UIN1: 4022791 !
! 400 S. Jefferson           !         ICQ UIN2: 13115282 !
! Hillsboro, KS 67063        ! kaufmjes@xxxxxxxxxxxxxxxxx !
+============================+============================+



---
This is the Air Capitol Linux Users Group discussion list.  If you
want to unsubscribe, send the word "unsubscribe" to
aclug-L-request@xxxxxxxxxxxx.  If you want to post to the list, send your
message to aclug-L@xxxxxxxxxxxx.