[Freeciv-Dev] (PR#2828) Special report on technological development

["editor@xxxxxxxxxxxxxxxxx via RT" <rt@xxxxxxxxxxxxxx>]

The Tech News, January 2003

Production Mini-plants in mobile containers. Co-investment Program

"...Science Network will supply to countries and developing regions the 
technology and necessary support for production in series of Mini-
plants in mobile containers (40-foot). The Mini-plant system is designed in 
such a way that all the production machinery is fixed on the platform of the 
container, with all wiring, piping, and installation parts; that is, they are 
fully equipped... and the mini-plant is ready for production."

More than 700 portable production systems: Bakeries, Steel Nails, Welding 
Electrodes, Tire Retreading, Reinforcement Bar Bending for Construction 
Framework, Sheeting for Roofing, Ceilings and Façades, Plated Drums, Aluminum 
Buckets, Injected Polypropylene Housewares, Pressed Melamine Items (Glasses, 
Cups, Plates, Mugs, etc.), Mufflers, Construction Electrically Welded Mesh, 
Plastic Bags and Packaging, Mobile units of medical assistance, Sanitary 
Material, Hypodermic Syringes, Hemostatic Clamps, etc. 
Science Network has started a Co-investment program for the installation of 
small Assembly plants to manufacture in series the Mini-plants of portable 
production on site, region or country where required. One of the most relevant 
features is the fact that these plants will be connected to the World Trade 
System (WTS) with access to more than 50 million raw materials, products and 
services and automatic transactions for world trade.

Due to financial reasons, involving cost and social impact, the best solution 
is setting up assembly plants on the same countries and regions, using local 
resources (labor, some equipment, etc.)

Science Network participates at 50% (fifty percent) for investment of each 
Assembly plant.

Request more information: <A HREF="mailto:letters@xxxxxxxxxxxxxxxxx";>Letters to 
the Editor</A>

By Robert B. Lethe, Editor


Mini-plantas de produccion en contenedores moviles. Programa de Co-inversion

"...Science Network suministrara a paises y regiones en vias de desarrollo la 
tecnologia y el apoyo necesario para la fabricacion en serie de Mini-plantas de 
produccion en contenedores moviles (40-foot). El sistema de Mini-plantas esta 
diseñado de forma que todas las maquinas de produccion van instaladas fijas 
sobre la propia plataforma del contenedor, con el cableado, tuberias e 
instalaciones; es decir, completamente equipadas... y a partir de ese momento 
están listas para producir." 
Mas de 700 sistemas de produccion portatil: Panaderias, Producción de clavos de 
acero, Electrodos para soldadura, Recauchutado de neumaticos, Curvado de hierro 
para armaduras de construccion, Lamina perfilada para cubiertas, techos y 
cerramientos de fachada, Bidones de chapa, Cubos de aluminio, Menaje de 
polipropileno inyectado, Piezas de melamina prensada (vasos, platos, tazas, 
cafeteras, etc.) Silenciadores para vehiculos, Malla electrosoldada para la 
construccion, Bolsas y envases de plastico, Unidades moviles de asistencia 
medica, Material sanitario (jeringas hipodermicas, Pinzas hemostaticas, etc.)

Science Network ha puesto en marcha un programa de Co-inversion para la 
instalacion de pequeñas Plantas ensambladoras para fabricar en serie las 
Mini-plantas de produccion portatil, en el lugar, region o pais que lo 
necesite. Una de las características relevantes es el hecho de que dichas 
plantas quedaran conectadas al Sistema del Comercio Mundial (WTS) con acceso a 
mas de 50 millones de mercancias, materia primas, productos, servicios y las 
operaciones automaticas de comercio internacional.

Resulta obvio que por razones economicas, de costes y de impacto social, lo 
apropiado es instalar plantas ensambladoras en los mismos paises y regiones asi 
como utilizar los recursos locales (mano de obra, ciertos equipamientos, etc.)

Science Network participa al 50% en la inversion de cada Planta ensambladora.

Solicitar mas informacion: <A HREF="mailto:letters@xxxxxxxxxxxxxxxxx";>Letters 
to the Editor</A>

Robert B. Lethe, Editor

-------------------------------------------------------------------------
If you received this in error or would like to be removed from our list, please 
return us indicating: remove or un-subscribe in subject field, Thanks. <A 
HREF="mailto:editor@xxxxxxxxxxxxxxxxx";> Editor</A>
© 2002 The Tech News. All rights reserved.

The Tech News, January 2003

Production Mini-plants in mobile containers. Co-investment Program

"...Science Network will supply to countries and developing regions the technology and necessary support for production in series of Mini-plants in mobile containers (40-foot). The Mini-plant system is designed in such a way that all the production machinery is fixed on the platform of the container, with all wiring, piping, and installation parts; that is, they are fully equipped... and the mini-plant is ready for production."

More than 700 portable production systems: Bakeries, Steel Nails, Welding Electrodes, Tire Retreading, Reinforcement Bar Bending for Construction Framework, Sheeting for Roofing, Ceilings and Façades, Plated Drums, Aluminum Buckets, Injected Polypropylene Housewares, Pressed Melamine Items (Glasses, Cups, Plates, Mugs, etc.), Mufflers, Construction Electrically Welded Mesh, Plastic Bags and Packaging, Mobile units of medical assistance, Sanitary Material, Hypodermic Syringes, Hemostatic Clamps, etc.

Science Network has started a Co-investment program for the installation of small Assembly plants to manufacture in series the Mini-plants of portable production on site, region or country where required. One of the most relevant features is the fact that these plants will be connected to the World Trade System (WTS) with access to more than 50 million raw materials, products and services and automatic transactions for world trade.

Due to financial reasons, involving cost and social impact, the best solution is setting up assembly plants on the same countries and regions, using local resources (labor, some equipment, etc.)

Science Network participates at 50% (fifty percent) for investment of each Assembly plant.

Request more information: Letters to the Editor

By Robert B. Lethe, Editor


Mini-plantas de produccion en contenedores moviles. Programa de Co-inversion

"...Science Network suministrara a paises y regiones en vias de desarrollo la tecnologia y el apoyo necesario para la fabricacion en serie de Mini-plantas de produccion en contenedores moviles (40-foot). El sistema de Mini-plantas esta diseñado de forma que todas las maquinas de produccion van instaladas fijas sobre la propia plataforma del contenedor, con el cableado, tuberias e instalaciones; es decir, completamente equipadas... y a partir de ese momento están listas para producir."

Mas de 700 sistemas de produccion portatil: Panaderias, Producción de clavos de acero, Electrodos para soldadura, Recauchutado de neumaticos, Curvado de hierro para armaduras de construccion, Lamina perfilada para cubiertas, techos y cerramientos de fachada, Bidones de chapa, Cubos de aluminio, Menaje de polipropileno inyectado, Piezas de melamina prensada (vasos, platos, tazas, cafeteras, etc.) Silenciadores para vehiculos, Malla electrosoldada para la construccion, Bolsas y envases de plastico, Unidades moviles de asistencia medica, Material sanitario (jeringas hipodermicas, Pinzas hemostaticas, etc.)

Science Network ha puesto en marcha un programa de Co-inversion para la instalacion de pequeñas Plantas ensambladoras para fabricar en serie las Mini-plantas de produccion portatil, en el lugar, region o pais que lo necesite. Una de las características relevantes es el hecho de que dichas plantas quedaran conectadas al Sistema del Comercio Mundial (WTS) con acceso a mas de 50 millones de mercancias, materia primas, productos, servicios y las operaciones automaticas de comercio internacional.

Resulta obvio que por razones economicas, de costes y de impacto social, lo apropiado es instalar plantas ensambladoras en los mismos paises y regiones asi como utilizar los recursos locales (mano de obra, ciertos equipamientos, etc.)

Science Network participa al 50% en la inversion de cada Planta ensambladora.

Solicitar mas informacion: Letters to the Editor

Robert B. Lethe, Editor

-------------------------------------------------------------------------
If you received this in error or would like to be removed from our list, please return us indicating: remove or un-subscribe in subject field, Thanks. Editor
© 2002 The Tech News. All rights reserved.