[linux-help] Re: KOnCD and ATAPI burner / KOnCD und ATAPI Brenner

[Denis Medvedev <t_mdl@xxxxxxxxx>]

--- Roland Mayer-Bachmann
<roland.mayer-bachmann@xxxxxxxxxxx> wrote:
> 
> Hello,
> is there someone who can help in solving the
> following burner problem?
> The SCSI Emulator is installed, the burner is
> realized, and also the=20
> Image File is written.
> But when writing the CD KOnCD creates an error
> protocol!??
What us KOnCD?

Looking to your protocol I can see that you are trying
to
write that on a CDR, but system is trying to blank it!
Try buying an ordinary 700-MB CD-RW and repeat the
procedure.
                        Sincerely.
                        Denis Medvedev

> 
> Now, where is the error (rotocol and boot.msg
> attached) ?
> 
> I would appreciate your help.
> Regards, Roland
> 
> 
> Hallo,
> kann mir jemand bei folgendem Brennerproblem helfen?
> Der SCSI Emulator ist installiert, der Brenner wird 
> erkannt, auch das=20
> Image File wird erstellt. Jedoch beim Versuch die CD
> zu beschreiben
> liefert KOnCD ein Fehlerprotkoll!?
> 
> Wo liegt nun der Fehler (Protokoll und boot.msg
> s.u.) ?
> 
> W=FCrde mich =FCber Ihre/Deine Hilfe freuen.
> Gru=DF, Roland
> 
> ****************************** KOnCD Protokoll
> *********************
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.20
> 
> Cdrecord 1.11a05 (i686-suse-linux) Copyright (C)
> 1995-2001 J=F6rg Schilli=
> ng
> TOC Type: 1 =3D CD-ROM
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : '        '
> Identifikation : 'RW-201040       '
> Revision       : '1.23'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
> RAW/R96R
> FIFO size      : 4194304 =3D 4096 KB
> 
> Track 01: data    1 MB       =20
> Total size:       1 MB (00:11.33) =3D 850 sectors
> Lout start:       2 MB (00:13/25) =3D 850 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 5
>   Is not unrestricted
>   Is not erasable
>   Disk sub type: Medium Type B, low Beta category
> (B-) (4)
>   ATIP start of lead in:  -11524 (97:28/26)
>   ATIP start of lead out: 359849 (79:59/74)
> Disk type:    Short strategy type (Phthalocyanine or
> similar)
> Manuf. index: 13
> Manufacturer: Multi Media Masters & Machinary SA
> Blocks total: 359849 Blocks current: 359849 Blocks
> remaining: 358999
> Starting to write CD/DVD at speed 8 in dummy mode
> for single session.
> Last chance to quit, starting dummy write in 9
> seconds.
>           8 seconds.
>           7 seconds.
>           6 seconds.
>           5 seconds.
>           4 seconds.
>           3 seconds.
>           2 seconds.
>           1 seconds.
>           0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> Blanking PMA, TOC, pregap
> 
> cdrecord: Input/output error. blank unit: scsi
> sendcmd: no error
> CDB:  A1 01 00 00 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 30
> 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x30 Qual 0x00 (incompatible medium
> installed) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 9600s
> cdrecord: Cannot blank disk, aborting.
> cdrecord: fifo had 28 puts and 0 gets.
> cdrecord: fifo was 0 times empty and 0 times full,
> min fill was 100%.
> 
> 
> ################# boot.msg ##################
> Inspecting /boot/System.map-2.4.10-4GB
> Loaded 11713 symbols from
> /boot/System.map-2.4.10-4GB.
> Symbols match kernel version 2.4.10.
> Loaded 15 symbols from 1 module.
> klogd 1.4.1, log source =3D ksyslog started.
> <4>Linux version 2.4.10-4GB (root@xxxxxxxxxxxxxxx)
> (gcc version 2.95.3=20
> 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001
> <6>BIOS-provided physical RAM map:
> <4> BIOS-e820: 0000000000000000 - 000000000009fc00
> (usable)
> <4> BIOS-e820: 000000000009fc00 - 00000000000a0000
> (reserved)
> <4> BIOS-e820: 00000000000f0000 - 0000000000100000
> (reserved)
> <4> BIOS-e820: 0000000000100000 - 000000003fff0000
> (usable)
> <4> BIOS-e820: 000000003fff0000 - 000000003fff3000
> (ACPI NVS)
> <4> BIOS-e820: 000000003fff3000 - 0000000040000000
> (ACPI data)
> <4> BIOS-e820: 00000000ffb00000 - 0000000100000000
> (reserved)
> <5>127MB HIGHMEM available.
> <4>found SMP MP-table at 000f5c10
> <4>hm, page 000f5000 reserved twice.
> <4>hm, page 000f6000 reserved twice.
> <4>hm, page 000f1000 reserved twice.
> <4>hm, page 000f2000 reserved twice.
> <4>On node 0 totalpages: 262128
> <4>zone(0): 4096 pages.
> <4>zone(1): 225280 pages.
> <4>zone(2): 32752 pages.
> <4>Intel MultiProcessor Specification v1.1
> <4>    Virtual Wire compatibility mode.
> <4>OEM ID: OEM00000 Product ID: PROD00000000 APIC
> at: 0xFEE00000
> <4>Processor #0 Unknown CPU [15:1] APIC version 17
> <4>I/O APIC #2 Version 17 at 0xFEC00000.
> <4>Processors: 1
> <4>Kernel command line: auto BOOT_IMAGE=3Dlinux ro
> root=3D305=20
> BOOT_FILE=3D/boot/vmlinuz enableapic vga=3D0x0314
> disableapic ide=3Dnodma=
> =20
> apm=3Doff hdc=3Dide-scsi
> <4>ide_setup: ide=3DnodmaIDE: Prevented DMA
> <4>ide_setup: hdc=3Dide-scsi
> <6>Initializing CPU#0
> <4>Detected 1800.063 MHz processor.
> <4>Console: colour dummy device 80x25
> <4>Calibrating delay loop... 3591.37 BogoMIPS
> <4>Memory: 1029084k/1048512k available (1289k kernel
> code, 19040k=20
> reserved, 381k data, 124k init, 131008k highmem)
> <4>Dentry-cache hash table entries: 131072 (order:
> 8, 1048576 bytes)
> <4>Inode-cache hash table entries: 65536 (order: 7,
> 524288 bytes)
> <4>Mount-cache hash table entries: 16384 (order: 5,
> 131072 bytes)
> <4>Buffer-cache hash table entries: 65536 (order: 6,
> 262144 bytes)
> <4>Page-cache hash table entries: 262144 (order: 8,
> 1048576 bytes)
> <7>CPU: Before vendor init, caps: 3febfbff 00000000
> 00000000, vendor =3D =
> 0
> <6>CPU: L1 I cache: 12K, L1 D cache: 8K
> <6>CPU: L2 cache: 256K
> <6>Intel machine check architecture supported.
> <6>Intel machine check reporting enabled on CPU#0.
> <7>CPU: After vendor init, caps: 3febfbff 00000000
> 00000000 00000000
> <7>CPU:     After generic, caps: 3febfbff 00000000
> 00000000 00000000
> <7>CPU:             Common caps: 3febfbff 00000000
> 00000000 00000000
> <4>CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping
> 02
> <6>Enabling fast FPU save and restore... done.
> <6>Enabling unmasked SIMD FPU exception support...
> done.
> <6>Checking 'hlt' instruction... OK.
> <4>POSIX conformance testing by UNIFIX
> <6>Disabled APIC by boot parameter!...
> <4>mtrr: v1.40 (20010327) Richard Gooch
> (rgooch@xxxxxxxxxxxxx)
> <4>mtrr: detected mtrr type: Intel
> <4>PCI: PCI BIOS revision 2.10 entry at 0xfb120,
> last bus=3D2
> 
=== message truncated ===

__________________________________________________
Do You Yahoo!?
Yahoo! Movies - coverage of the 74th Academy Awards®
http://movies.yahoo.com/
-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://www.complete.org/cgi-bin/listargate-aclug.cgi