[linux-help] cd burner Help !!!!!!!!

[Craig Terhune <cterhune@xxxxxxxxxxx>]

Help Help Help!!!!!!!!

Here is a copy of my boot message.=20
<4>hda: WDC AC33100H, ATA DISK drive
<4>hdb: WDC AC2540H, ATA DISK drive
<4>hdc: Memorex CRW-1622, ATAPI CDROM drive
<4>hdd: ATAPI CDROM, ATAPI CDROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: WDC AC33100H, 3020MB w/128kB Cache, CHS=3D767/128/63
<6>hdb: WDC AC2540H, 515MB w/128kB Cache, CHS=3D524/32/63
<4>hdd: ATAPI 24X CD-ROM drive, 128kB Cache
<6>Uniform CDROM driver Revision: 2.56
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>LVM version 0.8e  by Heinz Mauelshagen  (4/1/2000)
<4>lvm -- Driver successfully initialized
<4>md driver 0.36.6 MAX_MD_DEV=3D4, MAX_REAL=3D8
<4>linear personality registered
<4>raid0 personality registered
<4>raid1 personality registered
<4>raid5 personality registered
<4>scsi : 0 hosts.
<4>scsi : detected total.
<4>Partition check:
<4> hda: hda1 hda2 hda3 hda4
<4> hdb: hdb1
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 64k freed
<6>Adding Swap: 129020k swap-space (priority -1)
<4>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4>scsi : 1 host.
<4>  Vendor: Memorex   Model: CRW-1622          Rev: D4.0
<4>  Type:   CD-ROM                             ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
<4>sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.


I have added these lines to my mod.config. The idea was to stop th e ide =
mod
from grabbing the cd-writer.
 # Aliases - specify your hardware
alias eth0 rtl8139
alias eth1             off
alias tr0              off
alias fb0              off
alias   scsi_hostadaptor ide-scsi    # SCSI host adaptor emulation
options ide-cd ignore=3Dhdc            # if /dev/hdd is your CD-writer
#alias scd0 sr_mod                    # load sr_mod upon access of scd0
#pre-install ide-scsi modprobe imm    # uncomment for some ZIP drives onl=
y
pre-install sg     modprobe ide-scsi # load ide-scsi before sg
pre-install sr_mod modprobe ide-scsi # load ide-scsi before sr_mod
pre-install ide-scsi modprobe ide-cd # load ide-cd   before ide-scsi

Her is the cdrecord -scanbus output: It is the same as root
cterhune@hal:~ > cdrecord -scanbus=20
Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J=F6rg Schilling
cdrecord: Permission denied. Cannot open '/dev/sg0'. Cannot open SCSI dri=
ver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are=
 root.
=20

--  WALL'S A'LAMODE Wall flavors for every palette.
http://walls.homeip.net

-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi