Complete.Org: Mailing Lists: Archives: gopher: June 2004:
[gopher] Re: NT Server?
Home

[gopher] Re: NT Server?

[Top] [All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: gopher@xxxxxxxxxxxx
Subject: [gopher] Re: NT Server?
From: John Goerzen <jgoerzen@xxxxxxxxxxxx>
Date: Wed, 2 Jun 2004 08:52:41 -0500
Reply-to: gopher@xxxxxxxxxxxx

On Wed, Jun 02, 2004 at 02:19:41AM -0700, Cameron Kaiser wrote:
> > I am currently trying to run "Gophers" v0.5 on W2k Server.  Since I am
> > behind a firewall my machine has a NATed ip address (192.x.x.x).  When I try
> > to connect from offsite, I can view the selectors but clicking on them tries
> > to access the resource via the private ip address.  Needless to say, this
> > doesn't work.  Any ideas?
> 
> This is likely going to be a problem for almost any gopher server in this
> situation, alas. If you have access to the source, a kludgey but workable
> solution is just to hardcode the proper address in it, if your box has an
> externally accessible IP.

In Pygopherd, you could set the servername field in the control file,
which should take care of it for you.

I believe UMN gopherd has a smiilar setting.

-- John

> 
> -- 
> ---------------------------------- personal: http://www.armory.com/~spectre/ 
> --
>  Cameron Kaiser, Floodgap Systems Ltd * So. Calif., USA * ckaiser@xxxxxxxxxxxx
> -- Please dispose of this message in the usual manner. -- Mission: Impossible 
> -
> 


[Prev in Thread] Current Thread [Next in Thread]