Complete.Org: Mailing Lists: Archives: gopher: June 2004:
[gopher] Re: NT Server?

[gopher] Re: NT Server?

[Top] [All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: <gopher@xxxxxxxxxxxx>
Subject: [gopher] Re: NT Server?
From: "Andrew Mahan" <mahanam@xxxxxxxxxxx>
Date: Wed, 2 Jun 2004 02:29:57 -0700
Reply-to: gopher@xxxxxxxxxxxx

So basically I am hardcoding each selector to point to the public ip on my
router, and forwarding tcp port 70 to my server?

-----Original Message-----
From: gopher-bounce@xxxxxxxxxxxx [mailto:gopher-bounce@xxxxxxxxxxxx] On
Behalf Of Cameron Kaiser
Sent: Wednesday, June 02, 2004 2:20 AM
To: gopher@xxxxxxxxxxxx
Subject: [gopher] Re: NT Server?

> I am currently trying to run "Gophers" v0.5 on W2k Server.  Since I am
> behind a firewall my machine has a NATed ip address (192.x.x.x).  When I
> to connect from offsite, I can view the selectors but clicking on them
> to access the resource via the private ip address.  Needless to say, this
> doesn't work.  Any ideas?

This is likely going to be a problem for almost any gopher server in this
situation, alas. If you have access to the source, a kludgey but workable
solution is just to hardcode the proper address in it, if your box has an
externally accessible IP.

---------------------------------- personal:
 Cameron Kaiser, Floodgap Systems Ltd * So. Calif., USA *
-- Please dispose of this message in the usual manner. -- Mission:
Impossible -

[Prev in Thread] Current Thread [Next in Thread]