Complete.Org: Mailing Lists: Archives: discussion: May 2002:
[aclug-L] Re: Case Screws?
Home

[aclug-L] Re: Case Screws?

[Top] [All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: discussion@xxxxxxxxx
Subject: [aclug-L] Re: Case Screws?
From: Joseph L Weaver <jlweaver@xxxxxxx>
Date: Fri, 24 May 2002 08:23:49 -0500
Reply-to: discussion@xxxxxxxxx

Check the outlet store of National Computer.  They sell them in packages.  These
screws do not have normal threads.  Use a small plastic cup to hold the screws
when you are working on computers
========================================
David Carmichael wrote:

> Ok all have a good laugh....
>
> While working on my mothers system I had one of those 'freak' accidents
> where in the short of it the 'case screw' ended up down an air vent and can
> not be recovered....
>
> Well the holes/threads of the holes were enlarged/stripped due to the number
> of times that the case had been opened and closed.
>
> But where is the best place in the Wichita area to get replacement screws???
>
> The current screws were about a "#4" or "#6" Hex/Phillips heads.. so I
> figure that I now need the next size up...   But doing a quick look at
> 'Sutherlands' and 'Wal-Mart's all they have on hand are #10's which are too
> large.
>
> --David
>
> -- Binary/unsupported file stripped by Ecartis --
> -- Type: image/jpeg
> -- File: Notebook.jpg
>
> -- This is the discussion@xxxxxxxxx list.  To unsubscribe,
> visit http://www.complete.org/cgi-bin/listargate-aclug.cgi


-- This is the discussion@xxxxxxxxx list.  To unsubscribe,
visit http://www.complete.org/cgi-bin/listargate-aclug.cgi


[Prev in Thread] Current Thread [Next in Thread]