[aclug-L] Rolled my own Help

[Craig Terhune <craigter@xxxxxxxxx>]

Everything went OK. I had one error while booting. 
"Can not find dev/pts". I could not find anything in the dmesg that looked like
an error.  But I'll send it any way because I don't always know what I'm looking
at. ; ) One other thing do I need to edit the mod.config with the right setting
for my FDC for ftape to work. If so how would Igo about finding what they are.
It's now 2 o'clock please excuse any signs of incoherence. 
Linux version 2.2.5 (root@Hal) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 re
lease)) #4 Sat Oct 16 01:39:27 CDT 1999 Detected 233870187 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 466.94 BogoMIPS
Memory: 62980k/65536k available (1108k kernel code, 412k reserved, 1000k data, 3
6k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium MMX stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb020
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Initializing RT netlink socket
Starting kswapd v 1.5
Real Time Clock Driver v1.09
Sound initialization started
<Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5
<Sound Blaster 16> at 0x330 irq 5 dma 0
Sound initialization complete
ftape v3.04d 25/11/97 for Linux 2.2.5
[000] ftape-init.c (ftape_init) - installing QIC-117 floppy tape hardware drive
... .
[001] ftape-init.c (ftape_init) - ftape_init @ 0xc023a840.
[002]   ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c0004d60, dma area @ c0
080000.
[003]   ftape-buffer.c (add_one_buffer) - buffer nr #2 @ c0004e00, dma area @ c0
018000.
[004]   ftape-buffer.c (add_one_buffer) - buffer nr #3 @ c0004ea0, dma area @ c0
010000.
[007]  ftape-calibr.c (ftape_calibrate) - TC for `fdc_wait()' = 2012 nsec (at 25
59 counts).
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC33100H, ATA DISK drive
hdc: CD-ROM TW 240D, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC33100H, 3020MB w/128kB Cache, CHS=767/128/63
hdc: ATAPI 24X CD-ROM drive, 120kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linu
x/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6400, IRQ 10.
eth0: PCI NE2000 found at 0x6400, IRQ 10, 00:40:05:4C:8F:81.
Partition check:
 hda: hda1 hda2 hda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 129020k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: dsp reset failed.
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
VFS: Disk change detected on device ide1(22,0)
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.3 (demand dialling)
PPP line discipline registered.
registered device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered                       
 --
Unwritten man page:
Understanding Linux thru better medication
Maintained by Timothy Oleary