Complete.Org: Mailing Lists: Archives: discussion: October 1998:
Re: [aclug-L] IRQ's

Re: [aclug-L] IRQ's

[Top] [All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: aclug-L@xxxxxxxxxxxx
Subject: Re: [aclug-L] IRQ's
From: Bob Deep <bobd@xxxxxxxxxxxx>
Date: Tue, 13 Oct 1998 08:29:30 -0500
Reply-to: aclug-L@xxxxxxxxxxxx

Wayne White wrote:
> Well, I'm thinking of adding a network card and another
> parallel port to the linux box and don't know how to find
> out what IRQ's are assigned and to what. I assume that
> there must be a command that would give that info and
> perhaps I/O's as well. Couldn't find anything in the man
> pages, didn't know what to search for. Anyone want to
> give me a clue?

Look in /proc/interrupts for what interrupts are in use, and in
/proc/ioports for assinged IO addresses.

NOTE:  These files only tell you what the Kernel is using, so if you
have some hardware that is not being used by linux, you may still have
confilcts, but it should be a good start.

-= bob =-
This is the Air Capitol Linux Users Group discussion list.  If you
want to unsubscribe, send the word "unsubscribe" to
aclug-L-request@xxxxxxxxxxxx.  If you want to post to the list, send your
message to aclug-L@xxxxxxxxxxxx.

[Prev in Thread] Current Thread [Next in Thread]