Complete.Org: Mailing Lists: Archives: discussion: September 1998:
Re: [aclug-L] lingering kernel probs
Home

Re: [aclug-L] lingering kernel probs

[Top] [All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: aclug-L@xxxxxxxxxxxx
Subject: Re: [aclug-L] lingering kernel probs
From: Jeremy Johnstone <jsjohnst@xxxxxxxxxxx>
Date: Tue, 29 Sep 1998 18:01:38 -0500 (CDT)
Reply-to: aclug-L@xxxxxxxxxxxx

The problem is in your nam server setup. Both are locking up trying to get
a host name lookup for your system and finally time out after the
intervals you have seen. Make sure your hosname is right and that your
resolv.conf is configured properly. It is an easy fix.

On Tue, 29 Sep 1998, Jesse Kaufman wrote:

> ok, john...you said to upgrade my drivers...  what all does that
> involve?  (remember...i'm a newbie!)
> 
> i've downloaded kernel 2.1.123 and compiled.  left APM out for now, and
> it seemed to compile correctly... i made the modules and installed them,
> and then added it to lilo and tried to boot...  it got to sendmail again
> and just hangs...  what's going on here?  usually, it stops for 3
> seconds max, but it will take a few minutes on sendmail, then almost a
> half an hour on SMB...  ideas?
> 
> jesse
> 
> ---
> +============================+============================+
> ! Tabor College              !          ICQ UIN1: 4022791 !
> ! 400 S. Jefferson           !         ICQ UIN2: 13115282 !
> ! Hillsboro, KS 67063        ! kaufmjes@xxxxxxxxxxxxxxxxx !
> +============================+============================+
> ---
> This is the Air Capitol Linux Users Group discussion list.  If you
> want to unsubscribe, send the word "unsubscribe" to
> aclug-L-request@xxxxxxxxxxxx.  If you want to post to the list, send your
> message to aclug-L@xxxxxxxxxxxx.
> 

---
This is the Air Capitol Linux Users Group discussion list.  If you
want to unsubscribe, send the word "unsubscribe" to
aclug-L-request@xxxxxxxxxxxx.  If you want to post to the list, send your
message to aclug-L@xxxxxxxxxxxx.



[Prev in Thread] Current Thread [Next in Thread]