[aclug-L] X-Window Installation

[Sanjay Dhar <sxdhar@xxxxxxxxxxx>]

Hi,

I'm trying to run Debian Linux 2.0 on an X-86. I've almost got through the
installation procedure except the X-Window display. My monitor sync. rates
are 30 to 54KHz horizontal scanning and 50 to 120 Hz vertical scanning.
I'm using a Trident TVGI 9680 graphics adapter. My monitor supports
640x350, 640x400, 640x480, 800x600, 1024x768 and 1280x1024 resolutions.
I've tried all possible combinations of sync. rates and resolutions. But,
whenever I want to start an X-session(using startx) I get the following
message


_
XFree86 Version 3.3.2 / X Window System
_
(protocol Version 11, revision 0, vendor release 6300)
_
Release Date: March 2 1998
_
        If the server is older than 6-12 months, or if your card is newer


(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/psaux, resolution: 100
(**) Mouse: buttons: 3
(**) ET4000W32: Graphics device ID: "Primary Card"
(**) ET4000W32: Monitor ID: "Primary Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X1
(--) ET4000W32: PCI: Trident TGUI 96xx rev 211, Memory @ 0xe4000000,
0xe440000

 *** None of the configured devices were detected.***


Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit:  Connection refused (errno 111):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.
_
        than the above date, look for a newer version before reporting
_
        problems.  (see http://www.XFree86.Org/FAQ)
_
Operating System: Linux 2.0.32 i686 [ELF]
_
Configured drivers:
_
  ET4000W32: accelerated server for ET4000W32 graphics adaptors
(Patchlevel 0)_
      et4000w32, et4000w32i, et4000w32p_rev_a, et4000w32i_rev_b,
_
      et4000w32i_rev_c, et4000w32p_rev_b, et4000w32p_rev_c,
_
      et4000w32p_rev_d, et6000
_
(using VT number 7)
_

_
XF86Config: /etc/X11/XF86Config
_
(**) stands for supplied, (--) stands for probed/default values
_
(**) XKB: keycodes: "xfree86"
_
(**) XKB: types: "default"
_
(**) XKB: compat: "default"
_
(**) XKB: symbols: "us(pc101)"                                                


I would appreciate if somebody could help me out with this problem

----------------------------------------------------------------------------    
  
      SANJAY DHAR
 
      Tel(R)    : (316) 685-4302
      Tel(O)    : (316) 636-8649
      
      sxdhar@xxxxxxxxxxx
      Sanjay.Dhar@xxxxxxxxxxx
      
      http://www.cs.twsu.edu/~sxdhar

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

---
This is the Air Capitol Linux Users Group discussion list.  If you
want to unsubscribe, send the word "unsubscribe" to
aclug-L-request@xxxxxxxxxxxx.  If you want to post to the list, send your
message to aclug-L@xxxxxxxxxxxx.