Complete.Org: Mailing Lists: Archives: linux-help: July 2000:
[linux-help] Re: formating a linux partition
Home

[linux-help] Re: formating a linux partition

[Top] [All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index] [Thread Index]
To: <linux-help@xxxxxxxxx>
Subject: [linux-help] Re: formating a linux partition
From: "Matt Alexander" <webmaster@xxxxxxxxx>
Date: Mon, 17 Jul 2000 23:42:18 -0500
Reply-to: linux-help@xxxxxxxxx

I have heard of both, disk druid is the new one bundled with red hat 6.2.
How do I use one of them, don't they need to be on a boot disk?

                                  -Matt Alexander

-----Original Message-----
From: ssaner@xxxxxxxxxxxxxxxxxxxxx [mailto:ssaner@xxxxxxxxxxxxxxxxxxxxx]On
Behalf Of Steven Saner
Sent: Monday, July 17, 2000 11:37 PM
To: linux-help@xxxxxxxxx
Subject: [linux-help] Re: formating a linux partition

Oh, my bad. You should be able to use the Linux fdisk to delete the
partition. I am not familiar with disk druid.


On Mon, Jul 17, 2000 at 11:32:33PM -0500, Matt Alexander wrote:
> I don't want to format the contents of the partition but rather DELETE the
> whole thing. The partition was created when I installed Linux, it used
disk
> druid. It doesn't say what system the partition used.
>
> I can't format it because it says it is not a supported partition type.
>
>
>                                   -Matt Alexander
>
> -----Original Message-----
> From: ssaner@xxxxxxxxxxxxxxxxxxxxx [mailto:ssaner@xxxxxxxxxxxxxxxxxxxxx]On
> Behalf Of Steven Saner
> Sent: Monday, July 17, 2000 11:22 PM
> To: linux-help@xxxxxxxxx
> Subject: [linux-help] Re: formating a linux partition
>
> There is a difference between partitioning a drive and formating a
> partition. I assumed that you used the Linux fdisk to create the
> partition, and you successfully changed the type of the partition to
> something like FAT16. If not, then go back and see about that.
>
> Where it looks like you are going wrong is that you do not need to use
> the DOS fdisk for anything. fdisk does not format a partition, it
> creates and deletes partitions. You need to use the DOS program
> "format" to actually format the partition.
>
> Hopefully that gets you going. If not, you might send a list of the
> partitions that you are trying to create and we can attempt more
> complete advice.
>
>
> On Mon, Jul 17, 2000 at 11:07:00PM -0500, Matt Alexander wrote:
> > I have tried formatting a Linux partition (actually a dos partition [an
> > extended partition] but partitioned by Linux) with dos's fdisk command
but
> > am having problems (figures doesn't it?).  When I tell it to format an
> > extended partition, which it is, It tells me I can't partition it
because
> > logical partitions exist inside this ext. partition.  So when I try to
> > delete those logical partitions it says "No logical Partitions defined".
> > If you ask me, that's sorta' screwed up.
> >
> > Is there something I am doing wrong or is there another way that works?
> >
> >
> >
> > I used the word partition or a different tense of partition 10 times,
not
> > including the two time I just used it in this sentence.  :)
> >
> >
> > -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> > visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
>
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi
>
>
> -- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
> visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi

-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi


-- This is the linux-help@xxxxxxxxx list.  To unsubscribe,
visit http://tmp2.complete.org/cgi-bin/listargate-aclug.cgi


[Prev in Thread] Current Thread [Next in Thread]