[aclug-L] FW: You might be able to help

["Frost, Keith A" <Keith.Frost@xxxxxxxxxxxxxxxxxx>]

it seems that Design News is looking at linux.
if anyone knows of others please pass them along.
> ----------
> From:         Frost, Keith A
> Sent:         Friday, October 15, 1999 7:37 AM
> To:   'asktheexpert@xxxxxxxxxxx'
> Subject:      FW: You might be able to help
> 
> A friend had passed along a request for information regarding CAM in the
> linux world.
> 
> 
> this one is going to be more familiar to most http://www.vx.com
> Others : http://www.bartels.de
>        http://www.ribbonsoft.com
> 
> Much to my regret i have not worked with much CAM software.
> There may be others that i am unaware of.
> I do mostly drafting 2D/3D and rendering.
> If it is of any help here are some other links.
> 
> One of my favorites           http://SAL.KachinaTech.COM/sal1.shtml
> Best place to search          http://deja.com
> My page (it's a little out of date)
> http://www.cottagesoft.com/~phrostie/cad-tastrafy/
> 
> I hope this helps you.
> 
> Keith Frost
> phrostie@xxxxxxxxxxxxx
> 
> 
> #############################################
> 
> HELP!
> 
> Design News had this recent request for information. If any readers can 
> help, send a reply with the heading Linux to asktheexpert@xxxxxxxxxxx and 
> we'll pass it on and possibly publish some answers in our next newsletter.
> 
> W. Rueth writes:
> 
> What is out there in the CAM world for the Linux (UNIX) operating system?
> 
> #############################################
> 
> 
>